Solicitation

Penetrator, Hull

Department of Defense · Department of the Navy

AI summaryThe Navy's supply command (NAVSUP Weapon Systems Support, Mechanicsburg) wants connectorized hull penetrator assemblies (electrical connectors that pass through a ship's hull), part number CPG 1025/1-105, for a crucial shipboard system. The notice text gives no quantity or unit of issue. The response due date is November 2, 2026, 4:30 PM UTC-4 (3:30 PM Eastern). It needs first article testing (a sample built and tested by the Government before production is approved) and is a DX-rated order (top national defense priority). More in the summary

AI summary Beta

Written by AI from the notice text. Check dates on SAM.gov.

SAM.gov's data cuts this notice's text off, and this summary didn't read the attachments, so it may miss requirements. Check the attachments on SAM.gov.

The Navy's supply command (NAVSUP Weapon Systems Support, Mechanicsburg) wants connectorized hull penetrator assemblies (electrical connectors that pass through a ship's hull), part number CPG 1025/1-105, for a crucial shipboard system. The notice text gives no quantity or unit of issue. The response due date is November 2, 2026, 4:30 PM UTC-4 (3:30 PM Eastern). It needs first article testing (a sample built and tested by the Government before production is approved) and is a DX-rated order (top national defense priority).

Things to watch (7)

From the version posted Oct 16, 2026.

Serious: Set-aside status unclear. SAM.gov shows no set-aside. The amendment notes say both that the small business set-aside was removed and that the RFQ remains a small business set-aside, and a total small business set-aside clause is listed. Ask the contracting officer which applies.
Serious: Quantity and unit of issue not stated. The notice text gives no quantity or unit of issue for the penetrator assembly. A quote is priced per unit, so confirm both before pricing.
Worth checking: First article testing with a long approval chain. The Government tests a first sample before production is approved. The listed schedule includes weld data in 120 days adc (as written), approval 60 days after receipt, the first article test report 180 days after approval, and report approval 60 days after receipt, against final delivery within 365 days.

Show all 7Show fewer

Worth checking: DX-rated order under the Defense Priorities and Allocations System. A DX rating is the top national defense priority, so the contractor must give this order first call on materials and production under the DPAS rules.
Worth checking: Special emphasis shipboard material with strict traceability. The Navy treats the item as safety-critical (Level I). Expect material certification, traceability, mercury-free material, and a slow strain rate tensile test of QQ-N-286 at one of a list of named laboratories.
Worth checking: Drawings need an access request. Drawings are controlled; a bidder asks for access on the SAM.gov solicitation page and then emails the primary contact. Document references must be obtained by the bidder.
Minor: Closing date has been changed by amendment. Several amendments changed the closing date. The response due date to use is November 2, 2026, 3:30 PM Eastern, as SAM.gov shows.

Read from the notice text only.

Full summary

What they want

Connectorized Hull Penetrator Assemblies, Multiple Connector Type, CPG 1025/1, Part Number CPG 1025/1-105, built to specification CPG 1025; quantity and unit of issue not stated in the notice text
Furnish the assembly with both washers, CPG 1022/1-006 and CPG 1025/1-005
First article test sample(s) with Government testing and approval; the sample(s) must not be delivered against the contract quantity
Chemical and mechanical analysis of material and test certifications for listed parts (for example the penetrator body, cover, nut and washers) and for weldments
Weld procedure and qualification data submitted for review and approval before any welding or brazing
Certification data (contract data requirements list, CDRL, items on DD Form 1423) on or before 20 days prior to scheduled delivery
Final delivery on or before 365 days after the effective date of the resulting contract; one-year warranty from date of delivery; free on board (FOB) destination

Contract type: Request for quotations (RFQ); fixed-price supply order (Inspection of Supplies--Fixed-Price clause), issued under Emergency Acquisition Flexibilities
Period of performance: Final delivery on or before 365 days after the effective date of the resulting contract
Estimated value: Not stated
How they'll choose: Not stated. The Navy says it will consider past performance in evaluating offers.
Offers due: November 2, 2026, 4:30 PM UTC-4 (3:30 PM Eastern)

What they'll judge offers on

Past performance (considered under FAR 13.106(a)(2) and DFARS 252.213-7000)

What to include when you submit

If drawings are included, request access on the solicitation's own page on SAM.gov, then email the primary point of contact listed on the solicitation
Data Item A001 (Inspection and Test Plan) may be waived if already on file at NAVSUP WSS Mechanicsburg
Update any reference to Portsmouth Naval Shipyard's old DODAAC (shipping address code) N00102 to N50286

After award, you must have

Pass first article testing (Government testing and approval of a sample) before production is accepted From the notice: First Article Test (FAT) and approval is required.
Welding and brazing personnel and procedures must be qualified under the cited Navy standards, and procedures and qualification data approved before any welding From the notice: …personnel and procedures must be qualified under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, as applicable.

Not in the notice text

The notice text is cut off partway through the specification; later requirements, the full price schedule, packaging and any further clauses are missing, so check the full solicitation on SAM.gov
The quantity and unit of issue are not given
Where and how to send the quote is not stated in the text
The delivery address is not stated; the text only says FOB destination
The drawings (CPG 1022, CPG 1025 and related) are not in the text and must be requested on SAM.gov
Evaluation factors other than past performance, and the award method, are not stated

Eligibility and how to respond

No set-aside: any business, large or small, can bid unless the notice says otherwise.
How and where to submit is in the notice text and its attachments on SAM.gov.

Notice details

Posted: Oct 16, 2026
Notice type: Solicitation
Office: NAVSUP Weapon Systems Support Mech, Mechanicsburg, PA
Product/service code: 5995 · Cable, Cord, and Wire Assemblies: Communication Equipment
Business type: Electronic parts & equipment (supplies) (FedReady's grouping, from NAICS 335931)
Versions: 7 versions have been posted, newest first.
Oct 16, 2026 · Amendment 0006 (this version)Due Nov 2, 2026 (changed)
Mar 31, 2026 · Amendment 0005Due Apr 14, 2026 (changed)
Feb 20, 2026 · Amendment 0004Due Mar 23, 2026 (changed)
Feb 4, 2026 · Amendment 0003Due Feb 18, 2026 (changed)
Dec 30, 2025 · Amendment 0002Due Jan 28, 2026 (changed)
Dec 29, 2025 · Amendment 0001Due Apr 20, 2026
Sep 30, 2025 · SolicitationDue Apr 20, 2026
Attachments: Checking SAM.gov for this notice's files…
See attachments on SAM.gov

Past awards and competition

Who has won work like this before, the likely incumbent, and what similar contracts paid, from USAspending.gov.

Before you respond

Terms on this notice: Solicitation

Full notice text from SAM.gov

CONTACT INFORMATION|4|N743.22|WVS|771-229-0561|LYDIA.M.SHALOKA.CIV@US.NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|See specification sections C and E| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE - SHORT VERSION|8||||||||| GENERAL INFORMATION-FOB-DESTINATION|1|B| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Stand-Alone Receiving Report - Certifications Combo - Receiving Report & Invoice - Material|N/A|TBD|N00104|TBD|N39040 - Certifications, S4306A - Material|N50286|TBD|133.2|N/A|N/A|N39040 - Certifications|N/A|N/A |See DD FORM 1423|PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL LYDIA.M.SHALOKA.CIV@US.NAVY.MIL| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|One year from date of delivery|One year from date of delivery||||| WARRANTY OF DATA--BASIC (MAR 2014)|2||| FIRST ARTICLE APPROVAL--GOVERNMENT TESTING (SEP 1989)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (OCT 2020)(DEVIATION 2020-O0008)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND2025-O0004))|13|335931|600|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2|X|| EVALUATION OF FIRST ARTICLE TESTING|3|||| This amendment is being issued to change the solicitation closing date and remove the small business set-aside. This amendment is being issued to extend the solicitation closing date. This RFQ remains a small business set aside. This amendment is being issued to change the solicitation closing date. \ This amendment is being issued to change the solicitation closing date as drawings have been posted to SAM.gov. 1.DD1423 Data Item A001 (Inspection and Test Plan) may be waived if already on file at NAVSUP WSS Mechanicsburg. 2. Portsmouth NSY's DODAAC has changed from N00102 to N50286. Any reference to N00102 within this order should be updated to N50286. 3. The following proposed delivery schedule applies: Submission of Certification Data CDRLs will be on or before 20 days prior to scheduled delivery. Weld procedure and qual data 120 days adc Approval of weld procedures and qual data 60 days after receipt FAT REPORT 180 DAYS AFTER APPROVAL OF PR APPROVAL OF FAT REPORT 60 DAYS AFTER RECEIPT PNSY review/acceptance of Certification CDRLs 6 working days after receipt of Certification DD 1423 CDRLs. Final delivery of material will be on or before 365 days after effective date of the resulting contract. 4. Any contract awarded as a result of this solicitation will be "DX" rated order; "DX" rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS). 5. NAVSUP WSS Mechanicsburg will be considering past performance in the evaluation of offers in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000. 6. If drawings are included in the solicitation, access needs to be requested on the individual solicitation page on Contracts Opportunities on the Government's beta.SAM website. After requesting access, send an email to the Primary POC listed on the solicitation. 7. This order is issued pursuant to Emergency Acquisition Flexibilities (EAF). 8. This solicitation requires First Article Testing. See FAR 52.290-4 First Article Approval - Government Testing for more details. 1. SCOPE 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material. 2. APPLICABLE DOCUMENTS 2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.2.1 Specification Revisions - The specification revisions listed under "Documents References" below are the preferred revision. Older and/or newer r evisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric Contractor Data Submission) at: ht tps://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification revisions when material is certified to newly released revisions,without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g. E2009, R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listedwithin CSD155 or elsewhere within this contract. 2.2.2 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made. 2.2.3 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. DRAWING DATA=CPG1022 |96169| F| |D|0001 | F|49998|0030132 DRAWING DATA=CPG1022 |96169| F| |D|0002 | F|49998|0021064 DRAWING DATA=CPG1022 |96169| F| |D|0003 | F|49998|0022286 DRAWING DATA=CPG1022 |96169| F| |D|0004 | F|49998|0021419 DRAWING DATA=CPG1022 |96169| F| |D|0005 | F|49998|0022582 DRAWING DATA=CPG1022 |96169| F| |D|0006 | F|49998|0019811 DRAWING DATA=CPG1022 |96169| F| |D|0007 | F|49998|0022652 DRAWING DATA=CPG1022 |96169| F| |D|0008 | F|49998|0011258 DRAWING DATA=CPG1022 |96169| F| |D|0009 | F|49998|0023824 DRAWING DATA=CPG1022 |96169| F| |D|0010 | F|49998|0020856 DRAWING DATA=CPG1022 |96169| F| |D|0011 | F|49998|0014477 DRAWING DATA=CPG1022 |96169| F| |D|0012 | F|49998|0008560 DRAWING DATA=CPG1022 |96169| F| |D|0013 | F|49998|0018011 DRAWING DATA=CPG1022 |96169| F| |D|0014 | F|49998|0025103 DRAWING DATA=CPG1022 |96169| F| |D|0015 | F|49998|0023546 DRAWING DATA=CPG1022 |96169| F| |D|0016 | F|49998|0020347 DRAWING DATA=CPG1022 |96169| F| |D|0017 | F|49998|0025199 DRAWING DATA=CPG1022 |96169| F| |D|0018 | F|49998|0045572 DRAWING DATA=CPG1022 |96169| F| |D|0019 | F|49998|0040276 DRAWING DATA=CPG1022 |96169| F| |D|0020 | F|49998|0039212 DRAWING DATA=CPG1022 |96169| F| |D|0021 | F|49998|0030139 DRAWING DATA=CPG1022 |96169| F| |D|0022 | F|49998|0037282 DRAWING DATA=CPG1022 |96169| F| |D|0023 | F|49998|0033419 DRAWING DATA=CPG1022 |96169| F| |D|0024 | F|49998|0046612 DRAWING DATA=CPG1022 |96169| F| |D|0025 | F|49998|0042207 DRAWING DATA=CPG1022 |96169| F| |D|0026 | F|49998|0045002 DRAWING DATA=CPG1022 |96169| F| |D|0027 | F|49998|0009713 DRAWING DATA=CPG1022 |96169| F| |D|0028 | F|49998|0046354 DRAWING DATA=CPG1022 |96169| F| |D|0029 | F|49998|0005500 DRAWING DATA=CPG1022 |96169| F| |D|0030 | F|49998|0016659 DRAWING DATA=CPG1022 |96169| F| |D|0031 | F|49998|0041132 DRAWING DATA=CPG1022 |96169| F| |D|0032 | F|49998|0014803 DRAWING DATA=CPG1022 |96169| F| |D|0033 | F|49998|0013312 DRAWING DATA=CPG1022 |96169| F| |D|0034 | F|49998|0030085 DRAWING DATA=CPG1022 |96169| F| |D|0035 | F|49998|0031585 DRAWING DATA=CPG1022 |96169| F| |D|0036 | F|49998|0031527 DRAWING DATA=CPG1022 |96169| F| |D|0037 | F|49998|0012406 DRAWING DATA=CPG1022 |96169| F| |D|0038 | F|49998|0046896 DRAWING DATA=CPG1022 |96169| F| |D|0039 | F|49998|0010039 DRAWING DATA=CPG1022 |96169| F| |D|0040 | F|49998|0056377 DRAWING DATA=CPG1022 |96169| F| |D|0041 | F|49998|0005432 DRAWING DATA=CPG1022 |96169| F| |D|0042 | F|49998|0048047 DRAWING DATA=CPG1022 |96169| F| |D|0043 | F|49998|0052300 DRAWING DATA=CPG1022 |96169| F| |D|0044 | F|49998|0024276 DRAWING DATA=CPG1022 |96169| F| |D|0045 | F|49998|0034480 DRAWING DATA=CPG1022 |96169| F| |D|0046 | F|49998|0026803 DRAWING DATA=CPG1022 |96169| F| |D|0047 | F|49998|0012965 DRAWING DATA=CPG1022 |96169| F| |D|0048 | F|49998|0013581 DRAWING DATA=CPG1022 |96169| F| |D|0049 | F|49998|0010520 DRAWING DATA=CPG1022 |96169| F| |D|0050 | F|49998|0010755 DRAWING DATA=CPG1022 |96169| F| |D|0051 | F|49998|0018605 DRAWING DATA=CPG1022 |96169| F| |D|0052 | F|49998|0009701 DRAWING DATA=CPG1022 |96169| F| |D|0053 | F|49998|0024802 DRAWING DATA=CPG1022 |96169| F| |D|0054 | F|49998|0032131 DRAWING DATA=CPG1022 |96169| F| |D|0055 | F|49998|0014331 DRAWING DATA=CPG1022 |96169| F| |D|0056 | F|49998|0010587 DRAWING DATA=CPG1022 |96169| F| |D|0057 | F|49998|0015026 DRAWING DATA=CPG1022-1 |96169| D| |D|0000.A | D|49998|0074948 DRAWING DATA=CPG1022-1 |96169| D| |D|0000.B | C|49998|0129832 DRAWING DATA=CPG1022-1 |96169| D| |D|0000.C | D|49998|0016731 DRAWING DATA=CPG1022-1 |96169| D| |D|0001 | D|49998|0095662 DRAWING DATA=CPG1022-1 |96169| D| |D|0002 | C|49998|0048488 DRAWING DATA=CPG1022-1 |96169| D| |D|0003 | C|49998|0049407 DRAWING DATA=CPG1022-1 |96169| D| |D|0004 | D|49998|0061828 DRAWING DATA=CPG1022-1 |96169| D| |D|0005 | B|49998|0017369 DRAWING DATA=CPG1022-1 |96169| D| |D|0006 | D|49998|0024738 DRAWING DATA=CPG1022-1 |96169| D| |D|0007 | B|49998|0020905 DRAWING DATA=CPG1022-1 |96169| D| |D|0008 | D|49998|0019097 DRAWING DATA=CPG1022-1 |96169| D| |D|0009 | C|49998|0017763 DRAWING DATA=CPG1022-1 |96169| D| |D|0010 | D|49998|0055696 DRAWING DATA=CPG1022-1 |96169| D| |D|0011 | B|49998|0015906 DRAWING DATA=CPG1022-2 |96169| C| |D|0000.A | C|49998|0026601 DRAWING DATA=CPG1022-2 |96169| C| |D|0000.B | C|49998|0044606 DRAWING DATA=CPG1022-2 |96169| C| |D|0001 | C|49998|0027379 DRAWING DATA=CPG1022-2 |96169| C| |D|0002 | C|49998|0022109 DRAWING DATA=CPG1022-2 |96169| C| |D|0003 | B|49998|0020160 DRAWING DATA=CPG1022-2 |96169| C| |D|0004 | C|49998|0019533 DRAWING DATA=CPG1022-2 |96169| C| |D|0005 | B|49998|0017894 DRAWING DATA=CPG1022-2 |96169| C| |D|0006 | B|49998|0021878 DRAWING DATA=CPG1025 |96169| P| |D|0001 | P|49998|0031294 DRAWING DATA=CPG1025 |96169| P| |D|0002 | P|49998|0013077 DRAWING DATA=CPG1025 |96169| P| |D|0003 | P|49998|0011923 DRAWING DATA=CPG1025 |96169| P| |D|0004 | P|49998|0021385 DRAWING DATA=CPG1025 |96169| P| |D|0005 | P|49998|0020123 DRAWING DATA=CPG1025 |96169| P| |D|0006 | P|49998|0012596 DRAWING DATA=CPG1025 |96169| P| |D|0007 | P|49998|0020575 DRAWING DATA=CPG1025 |96169| P| |D|0008 | P|49998|0025829 DRAWING DATA=CPG1025 |96169| P| |D|0009 | P|49998|0025129 DRAWING DATA=CPG1025 |96169| P| |D|0010 | P|49998|0025305 DRAWING DATA=CPG1025 |96169| P| |D|0011 | P|49998|0026218 DRAWING DATA=CPG1025 |96169| P| |D|0012 | P|49998|0023610 DRAWING DATA=CPG1025 |96169| P| |D|0013 | P|49998|0024504 DRAWING DATA=CPG1025 |96169| P| |D|0014 | P|49998|0020909 DRAWING DATA=CPG1025 |96169| P| |D|0015 | P|49998|0025043 DRAWING DATA=CPG1025 |96169| P| |D|0016 | P|49998|0024761 DRAWING DATA=CPG1025 |96169| P| |D|0017 | P|49998|0027299 DRAWING DATA=CPG1025 |96169| P| |D|0018 | P|49998|0042937 DRAWING DATA=CPG1025 |96169| P| |D|0019 | P|49998|0040502 DRAWING DATA=CPG1025 |96169| P| |D|0020 | P|49998|0036449 DRAWING DATA=CPG1025 |96169| P| |D|0021 | P|49998|0036830 DRAWING DATA=CPG1025 |96169| P| |D|0022 | P|49998|0033796 DRAWING DATA=CPG1025 |96169| P| |D|0023 | P|49998|0027339 DRAWING DATA=CPG1025 |96169| P| |D|0024 | P|49998|0041721 DRAWING DATA=CPG1025 |96169| P| |D|0025 | P|49998|0036782 DRAWING DATA=CPG1025 |96169| P| |D|0026 | P|49998|0037911 DRAWING DATA=CPG1025 |96169| P| |D|0027 | P|49998|0019706 DRAWING DATA=CPG1025 |96169| P| |D|0028 | P|49998|0031258 DRAWING DATA=CPG1025 |96169| P| |D|0029 | P|49998|0028386 DRAWING DATA=CPG1025 |96169| P| |D|0030 | P|49998|0034996 DRAWING DATA=CPG1025 |96169| P| |D|0031 | P|49998|0037489 DRAWING DATA=CPG1025 |96169| P| |D|0032 | P|49998|0026677 DRAWING DATA=CPG1025 |96169| P| |D|0033 | P|49998|0017312 DRAWING DATA=CPG1025 |96169| P| |D|0034 | P|49998|0030851 DRAWING DATA=CPG1025 |96169| P| |D|0035 | P|49998|0028589 DRAWING DATA=CPG1025 |96169| P| |D|0036 | P|49998|0009063 DRAWING DATA=CPG1025 |96169| P| |D|0037 | P|49998|0004112 DRAWING DATA=CPG1025 |96169| P| |D|0038 | P|49998|0013152 DRAWING DATA=CPG1025 |96169| P| |D|0039 | P|49998|0009572 DRAWING DATA=CPG1025 |96169| P| |D|0040 | P|49998|0012321 DRAWING DATA=CPG1025 |96169| P| |D|0041 | P|49998|0009310 DRAWING DATA=CPG1025 |96169| P| |D|0042 | P|49998|0006784 DRAWING DATA=CPG1025 |96169| P| |D|0043 | P|49998|0006124 DRAWING DATA=CPG1025 |96169| P| |D|0044 | P|49998|0008489 DRAWING DATA=CPG1025 |96169| P| |D|0045 | P|49998|0007044 DRAWING DATA=CPG1025-1 |96169| M| |D|0000.A | M|49998|0758554 DRAWING DATA=CPG1025-1 |96169| M| |D|0000.B | G|49998|1277830 DRAWING DATA=CPG1025-1 |96169| M| |D|0000.C | M|49998|0763525 DRAWING DATA=CPG1025-1 |96169| M| |D|0001 | L|49998|1091102 DRAWING DATA=CPG1025-1 |96169| M| |D|0002 | M|49998|1201771 DRAWING DATA=CPG1025-1 |96169| M| |D|0003 | L|49998|1102853 DRAWING DATA=CPG1025-1 |96169| M| |D|0004 | E|49998|0841196 DRAWING DATA=CPG1025-1 |96169| M| |D|0005 | D|49998|0392069 DRAWING DATA=CPG1025-1 |96169| M| |D|0006 | B|49998|0547744 DRAWING DATA=CPG1025-1 |96169| M| |D|0007 | D|49998|0409468 DRAWING DATA=CPG1025-1 |96169| M| |D|0008 | B|49998|0424196 DRAWING DATA=CPG1025-1 |96169| M| |D|0009 | L|49998|0555538 DRAWING DATA=CPG1025-1 |96169| M| |D|0010 | J|49998|0536845 DRAWING DATA=CPG1025-1 |96169| M| |D|0011 | B|49998|0594238 DRAWING DATA=CPG1025-1 |96169| M| |D|0012 | A|49998|0635118 DRAWING DATA=CPG1025-1 |96169| M| |D|0013 | F|49998|0683845 DRAWING DATA=CPG1025-1 |96169| M| |D|0014 | C|49998|0649459 DRAWING DATA=CPG1025-1 |96169| M| |D|0015 | A|49998|0543639 DRAWING DATA=CPG1025-1 |96169| M| |D|0016 | C|49998|0683318 DRAWING DATA=CPG1025-1 |96169| M| |D|0017 | D|49998|0554866 DRAWING DATA=CPG1025-1 |96169| M| |D|0018 | D|49998|0421953 DRAWING DATA=CPG1025-1 |96169| M| |D|0019 | K|49998|0559184 DRAWING DATA=CPG1025-1 |96169| M| |D|0020 | K|49998|0762215 DRAWING DATA=CPG1025-1 |96169| M| |D|0021 | M|49998|0397387 DRAWING DATA=CPG1025-2 |96169| K| |D|0000.A | K|49998|0360625 DRAWING DATA=CPG1025-2 |96169| K| |D|0000.B | D|49998|0070485 DRAWING DATA=CPG1025-2 |96169| K| |D|0000.C | K|49998|0359139 DRAWING DATA=CPG1025-2 |96169| K| |D|0001 | J|49998|0498469 DRAWING DATA=CPG1025-2 |96169| K| |D|0002 | K|49998|0607194 DRAWING DATA=CPG1025-2 |96169| K| |D|0003 | G|49998|0491202 DRAWING DATA=CPG1025-2 |96169| K| |D|0004 | E|49998|0491268 DRAWING DATA=CPG1025-2 |96169| K| |D|0005 | F|49998|0659594 DRAWING DATA=CPG1025-2 |96169| K| |D|0006 | F|49998|0049431 DRAWING DATA=CPG1025-2 |96169| K| |D|0007 | F|49998|0566711 DRAWING DATA=CPG1025-2 |96169| K| |D|0008 | D|49998|0028577 DRAWING DATA=CPG1025-2 |96169| K| |D|0009 | D|49998|0032712 DRAWING DATA=CPG1025-2 |96169| K| |D|0010 | D|49998|0014537 DRAWING DATA=CPG1025-2 |96169| K| |D|0011 | D|49998|0017877 DRAWING DATA=CPG1025-2 |96169| K| |D|0012 | D|49998|0014800 DRAWING DATA=CPG1025-2 |96169| K| |D|0013 | D|49998|0017435 DRAWING DATA=CPG1025-2 |96169| K| |D|0014 | D|49998|0019633 DRAWING DATA=CPG1025-2 |96169| K| |D|0015 | H|49998|0360727 DRAWING DATA=CPG1025-2 |96169| K| |D|0016 | K|49998|0452047 DRAWING DATA=CPG1025-2 |96169| K| |D|0017 | K|49998|0289051 DRAWING DATA=CPG1025-3 |96169| R| |D|0000.A | R|49998|0027337 DRAWING DATA=CPG1025-3 |96169| R| |D|0000.B | F|49998|0044462 DRAWING DATA=CPG1025-3 |96169| R| |D|0000.C | P|49998|0038682 DRAWING DATA=CPG1025-3 |96169| R| |D|0000.D | R|49998|0022384 DRAWING DATA=CPG1025-3 |96169| R| |D|0001 | N|49998|0028525 DRAWING DATA=CPG1025-3 |96169| R| |D|0002 | Q|49998|0024913 DRAWING DATA=CPG1025-3 |96169| R| |D|0002.A | Q|49998|0021598 DRAWING DATA=CPG1025-3 |96169| R| |D|0003 | K|49998|0046168 DRAWING DATA=CPG1025-3 |96169| R| |D|0003.A | R|49998|0013944 DRAWING DATA=CPG1025-3 |96169| R| |D|0004 | Q|49998|0040401 DRAWING DATA=CPG1025-3 |96169| R| |D|0005 | F|49998|0021760 DRAWING DATA=CPG1025-3 |96169| R| |D|0006 | B|49998|0022212 DRAWING DATA=CPG1025-3 |96169| R| |D|0007 | A|49998|0015109 DRAWING DATA=CPG1025-3 |96169| R| |D|0008 | A|49998|0015794 DRAWING DATA=CPG1025-3 |96169| R| |D|0009 | A|49998|0013290 DRAWING DATA=CPG1025-3 |96169| R| |D|0010 | C|49998|0012815 DRAWING DATA=CPG1025-3 |96169| R| |D|0011 | C|49998|0028422 DRAWING DATA=CPG1025-3 |96169| R| |D|0012 | C|49998|0014600 DRAWING DATA=CPG1025-3 |96169| R| |D|0013 | Q|49998|0017327 DRAWING DATA=CPG1025-3 |96169| R| |D|0014 | B|49998|0018098 DRAWING DATA=CPG1025-3 |96169| R| |D|0015 | A|49998|0017742 DRAWING DATA=CPG1025-3 |96169| R| |D|0016 | C|49998|0019329 DRAWING DATA=CPG1025-3 |96169| R| |D|0017 | C|49998|0013702 DRAWING DATA=CPG1025-3 |96169| R| |D|0018 | A|49998|0012067 DRAWING DATA=CPG1025-3 |96169| R| |D|0019 | G|49998|0016930 DRAWING DATA=CPG1025-3 |96169| R| |D|0020 | B|49998|0019213 DRAWING DATA=CPG1025-3 |96169| R| |D|0021 | C|49998|0017065 DRAWING DATA=CPG1025-3 |96169| R| |D|0022 | C|49998|0012754 DRAWING DATA=CPG1025-3 |96169| R| |D|0023 | E|49998|0013130 DRAWING DATA=CPG1025-3 |96169| R| |D|0024 | C|49998|0012962 DRAWING DATA=CPG1025-3 |96169| R| |D|0025 | C|49998|0010377 DRAWING DATA=CPG1025-3 |96169| R| |D|0026 | C|49998|0015104 DRAWING DATA=CPG1025-3 |96169| R| |D|0027 | D|49998|0018254 DRAWING DATA=CPG1025-3 |96169| R| |D|0028 | H|49998|0010629 DRAWING DATA=CPG1025-3 |96169| R| |D|0029 | Q|49998|0018638 DRAWING DATA=CPG1025-3 |96169| R| |D|0030 | N|49998|0023420 DRAWING DATA=CPG1025-3 |96169| R| |D|0031 | N|49998|0014315 DRAWING DATA=CPG1025-3 |96169| R| |D|0032 | P|49998|0020641 DRAWING DATA=CPG1025-3 |96169| R| |D|0033 | P|49998|0013362 DRAWING DATA=CPG1025-3 |96169| R| |D|0034 | R|49998|0012151 DOCUMENT REF DATA=FED-STD-H28 | | |B |190424|A| | | DOCUMENT REF DATA=FED-STD-H28 |0020| |B |941221|A| |01| DOCUMENT REF DATA=ANSI/ASQ Z1.4 | | | |080101|A| | | DOCUMENT REF DATA=QQ-N-281 | | |D |851023|A| 2| | DOCUMENT REF DATA=QQ-N-286 | | |G |001207|A| | | DOCUMENT REF DATA=MIL-STD-792 | | |F |060519|A| | | DOCUMENT REF DATA=MIL-STD-2035 | | |A |950515|A| | | DOCUMENT REF DATA=MIL-STD-2132 | | |D |080310|F| |01| DOCUMENT REF DATA=ISO_9001 | | | |081115|A| | | DOCUMENT REF DATA=ISO10012 | | | |030415|A| | | DOCUMENT REF DATA=ISO/IEC 17025 | | | |050515|A| | | DOCUMENT REF DATA=MIL-DTL-24231 | | |E |130426|A| | | DOCUMENT REF DATA=MIL-DTL-24231 |0005| |E |130426|A| | | DOCUMENT REF DATA=MIL-DTL-24231 |0011| |E |130426|A| | | DOCUMENT REF DATA=MIL-DTL-24231 |0012| |E |130426|A| | | DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A| 1| | DOCUMENT REF DATA=MIL-STD-45662 | | |A |880801|A| | | DOCUMENT REF DATA=A-A-59004 | | |B |181118|A| | | DOCUMENT REF DATA=ANSI/NCSL Z540.3 | | | |130326|A| | | DOCUMENT REF DATA=0900-LP-001-7000 | | | |810101|C| |01| DOCUMENT REF DATA=S9074-AQ-GIB-010/248 | | |1 |191112|A| | | DOCUMENT REF DATA=T9074-AS-GIB-010/271 | | |1 |140911|A| | | DOCUMENT REF DATA=S9074-AR-GIB-010A/278 (CHG A) | | | |130214|A| | | 3. REQUIREMENTS 3.1 Manufacture and Design - The item furnished under this contract/purchase order must meet the requirements as specified in CPG 1025, except as amplified or modified herein. CPG 1025 ordering data information is provided below. (a) Penetrator, Connector Type, Electrical; CPG 1025. (b) ;Connectorized Hull Penetrator Assemblies Multiple Connector Type, CPG 1025/1, Part Number CPG 1025/1-105; (c) Special wiring and inboard cables are not required. (d) Pressure proof receptacle caps are not required. (e) Level of preservation, packaging, and marking must be as specified elsewhere in the contract/purchase order. 3.2 First Article Approval (Government Testing) - First Article Test (FAT) and approval is required. 3.3 ;The FAT sample(s) must not be delivered against the contract quantity.; 3.4 ;This Penetrator Assembly must be furnished with both Washers, CPG 1022/1-006 and CPG 1025/1-005. First Article Testing may be performed with either Washer.; 3.5 ;Paragraph 4.1 of CPG 1025 does not apply.; 3.6 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise: Part - ;Penetrator Body, CPG 1025/1-001; Penetrator Cover, M24231/11-008; Nut, CPG 1022/1-005; and Washers, CPG 1022/1-006 and CPG 1025/1-005; Material - ;QQ-N-286, Form 2, Annealed and Age Hardened; or QQ-N-286, Form 7, Annealed and Age Hardened. Mechanical properties to be in accordance with CPG 1025, Paragraph 3.3.2; Part - ;Receptacle Body, M24231/12-010; Material - ;QQ-N-281, Class A and must meet the requirements of MIL-DTL-24231 Paragraph 3.3.2.1; 3.7 Testing Certification - Certifications are required for the following tests on the items listed below. Additional testing on other piece parts (if any) per applicable drawings and specifications is still required, but certifications are only required as listed below. Test - 5x Visual Magnification or Dye Penetrant Inspection (root layer) Item - Weldments Performance - T9074-AS-GIB-010/271 Acceptance - MIL-STD-2035 Test - Visual and Dye Penetrant Inspection (final layer) Item - Weldments Performance - T9074-AS-GIB-010/271 Acceptance - MIL-STD-2035 Test - Non-Destructive Tests Item - ;Weld Repair (as applicable); Performance - Per applicable fabrication specification Acceptance - Per applicable fabrication specification Test - Quality Conformance/Compliance Inspection Item - ;Each Hull Penetrator Assembly; Performance - ;CPG 1025, Paragraph 4.5; Acceptance - ;CPG 1025, Paragraph 4.5; Attribute - Annealing and Age Hardening Item - ;Each Penetrator Body, CPG 1025/1-001; Penetrator Cover, M24231/11-008; Nut, CPG 1022/1-005; and Washers, CPG 1022/1-006 and CPG 1025/1-005; Performance - QQ-N-286 Test - Ultrasonic Inspection on Starting Material Item - ;All Items requiring certification made from QQ-N-286 with a diameter or minimum distance between parallel surfaces of 4 inches or greater of the starting material, or when required by a drawing or specification invoked elsewhere in this contract; Performance - T9074-AS-GIB-010/271 or MIL-STD-2132, and QQ-N-286 Acceptance - QQ-N-286 Attribute - Time Temperature plots and certified calibration records of furnace temperature measuring devices Item - ;Each Penetrator Body, CPG 1025/1-001; Penetrator Cover, M24231/11-008; Nut, CPG 1022/1-005; and Washers, CPG 1022/1-006 and CPG 1025/1-005; Performance - ;When required by CPG 1025, Paragraph 3.3.1.2; Test - ;Dye Penetrant Inspection; Item - ;Each Penetrator Body (CPG 1025/1-001), Penetrator Cover (M24231/11-008), Nut (CPG 1022/1-005), and Washers (CPG 1022/1-006 and CPG 1025/1-005); Performance - T9074-AS-GIB-010/271 Acceptance - MIL-STD-2035 3.8 The pressure tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For pressure tests below 100 PSIG, the pressure tolerance must be +1 PSIG / -0 PSIG. For pressure tests at or above 100 PSIG up to and including 2500 PSIG, the pressure tolerance must be +2% / -0 PSIG rounded off to the nearest multiple of the smallest graduation on an analog test pressure gauge, not to exceed 50 PSIG. For pressure tests above 2500 PSIG, the pressure tolerance must be +2% / -0 PSIG, rounded off to the nearest multiple of the smallest graduation on an analog test pressure gauge, not to exceed 200 PSIG. The pressure test time tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure test time tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For a test duration up to and including 1 hour, the tolerance must be +5 minutes / - 0 minutes. For a test duration of more than 1 hour up to and including 24 hours, the tolerance must be +30 minutes / - 0 minutes. For a test duration of more than 24 hours, the tolerance must be +60 minutes / - 0 minutes. 3.9 O-ring grooves and mating sealing surfaces must be inspected per the contractually invoked drawings or specifications. When the drawings or specifications do not provide specific defect criteria or state that no defects are allowed, the General Acceptance Criteria (GAC) standard must be used for inspecting O-ring grooves and mating sealing surfaces only. Repairs to sealing surfaces and O-ring grooves with unacceptable defects may be accomplished within the limits of the size and tolerances provided in the applicable drawing. Repairs thatwould exceed these limits require approval (including final dimensions). The data that is red lined (crossed out) is excluded from the GAC for this contract and is not to be used for acceptance or rejection criteria. The GAC document is identified as Contract Support Library Reference Number CSD008 at https://register.nslc.navy.mil/ 3.10 Thread Inspection Requirements - All threads on threaded parts must be inspected using appropriate inspection methods, inspection systems, and inspection gages/instruments in accordance with FED-STD-H28 series. Substitution of thecommercial equivalent inspection in accordance with ASME B1 series is acceptable. 3.10.1 System 21 of FED-STD-H28/20 must be used as a minimum inspection requirement for threads when the design drawing or design specification does not specify an inspection requirement. 3.10.2 For Navy and Shipyard drawings, system 21 of FED-STD-H28/20 may be substituted for System 22 without further Navy approval when the design drawing invokes System 22 and does not cite governing specifications that specifically require system 22. System 22 of FED-STD-H28/20 must be used when the drawing references other governing specifications that specifically require System 22, such as certain thread types of MIL-DTL-1222. 3.10.3 A written request for concurrence must be submitted when utilizing alternative measuring equipment or measuring systems not applicable to the specified inspection system. 3.11 Internal Threads - All internal threads must be formed by cutting. Cold forming of internal threads is not acceptable. 3.12 Thread Lubricant - Thread lubricants containing molybdenum disulfide must not be used on this material. Bacteria in water, especially seawater, causes molybdenum disulfide to break down. The by-products of the breakdown form compounds which attack the fasteners. Anti-galling compound A-A-59004 must be used as a replacement when thread lubricant is required for assembly. 3.13 Welding or Brazing - When welding, brazing, and allied processes are required, as invoked by Section C paragraph 3 requirements, they must be in accordance with S9074-AR-GIB-010A/278, 0900-LP-001-7000 for brazing of piping and pressure vessel applications, or S9074-AQ-GIB-010/248 for brazing of other applications. For all production and repair welding and brazing, personnel and procedures must be qualified under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, as applicable. Repair welding is not permitted on ;QQ-N-286; . Procedures and Qualification Data must be submitted for review and approval prior to performing any welding or brazing. 3.14 Slow Strain Rate Tensile Test Laboratories - The Slow Strain Rate Tensile Test of QQ-N-286 must be performed by one of the following laboratories: Huntington Alloys, a Special Metals Company Attn: Bill Bolenr 3200 Riverside Drive Huntington, WV 257059 Phone: (304) 526-5889 FAX: (304) 526-5973 Metallurgical Consultants, Inc. Attn: W. M. Buehler 4820 Caroline PO Box 88046 Houston, TX 77288-0046 Phone: (713) 526-6351 FAX: (713) 526-2964 Naval Surface Warfare Center, Carderock Division Attn: Eric Focht Code 614 9500 Macarthur Blvd West Bethesda, MD 20817-5700 Phone: (301) 227-5032 FAX: (301) 227-5576 Teledyne Allvac Attn: Dr. W. D. Cao 2020 Ashcraft Ave. Monroe, NC 28110 Phone: (704) 289-4511 FAX: (704) 289-4269 Westmoreland Mechanical Testing and Research Inc. Attn: Andrew Wisniewski P.O. Box 388 Youngstown, PA 15696-0388 Mannesmann Rohrenwerke Mannesmann Forschungsinstitut (MFI) Attn: Dr. Weiss Postfach 251160 47251 Duisburg Germany Phone: 011-49-0203-9993194 FAX: 011-49-0203-9994415 ThyssenKrupp VDM USA, Inc. Attn: D. C. Agarwal 11210 Steeplecrest Drive, Suite 120 Houston, TX 77065-4939 Phone: (281) 955-6683 3.15 Configuration Control - The Contractor must maintain the total equipment baseline configuration. For items of proprietary design, Contractor drawings showing the latest assembly configuration must be provided to the Government in electronic (C4) format. Definitions are provided elsewhere in the Contract/Purchase Order. 3.15.1 Waivers/Deviations - All waivers and deviations, regardless of significance or classification require review and approval by the Contracting Officer. Waivers and Deviations must be designated as Critical, Major, or Minor. The Contractor must provide a copy of this request to the QAR. Requests must include the information listed below. a. A complete description of the contract requirement affected and the nature of the waiver/deviation (non-conformance), including a classification of Critical, Major, or Minor. b. Number of units (and serial/lot numbers) to be delivered in this configuration. c. Any impacts to logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel or impacts to the operational use of the product. d. Information about remedial action being taken to prevent reoccurrence of the non-conformance. 3.15.2 All requests for Waivers/Deviations on NAVSUP-WSS Contracts must be submitted to the NAVSUP WSS Contracting Specialist via eMail. 3.15.3 ECPs - The Government will maintain configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the Equipment and its sub-assemblies. The Contractor must submit an Engineering Change Proposal (ECP) for any Class I or II changes that impact the Equipment covered by this contract. ECPs must be prepared in Contractor format, and must include the following information: a. The change priority, change classification (Class I or Class II), and change justification. b. A complete description of the change to be made and the need for that change. c. A complete listing of other Configuration Items impacted by the proposed change and a description of the impact on those CIs. d. Proposed changes to documents controlled by the Government. e. Proposed serial/lot number effectivities of units to be produced in, or retrofitted to, the proposed configuration. f. Recommendations about the way a retrofit should be accomplished. g. Impacts to any logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel in support of the product. h. Impacts to the operational use of the product. i. Complete estimated life-cycle cost impact of the proposed change. j. Milestones relating to the processing and implementation of the engineering change. 3.16 Mercury Free - Mercury and mercury containing compounds must not be intentionally added or come in direct contact with hardware or supplies furnished under this contract. Mercury contamination of the ma...

Similar open opportunities

Hull PenetratorDepartment of Defense · Department of the Navy · Due Nov 5, 2026The Navy's supply office in Mechanicsburg (NAVSUP Weapon Systems Support) wants Hull Penetrators made to Teledyne Drawing 1080495 and EB specification EB-4749.
Penetrator AssyDepartment of Defense · Department of the Navy · Due Nov 6, 2026NAVSUP Weapon Systems Support (Navy) wants a manufacturer to build penetrator assemblies, watertight cable fittings for a crucial shipboard system, to Navy drawings.
Wiring HarnessDepartment of Defense · Department of the Navy · Due Nov 16, 2026NAVSUP Weapon Systems Support, a Navy buying office, is asking for quotes on a wiring harness (a bundle of wires and connectors) in a spares buy that uses competitive procedures…
Cable Assembly, SpecDepartment of Defense · Department of the Navy · Due Nov 17, 2026NAVSUP Weapon Systems Support has posted a solicitation for a special cable assembly.
Cable AssyDepartment of Defense · Department of the Navy · Due Nov 20, 2026The Navy's NAVSUP Weapon Systems Support (the Navy's parts-buying command) wants AN/BRR-6 Outboard Cable Assemblies for Navy submarines, bought through a request for quotation…

Get new contracts like this one by email. Our free weekly contracts email, no account needed: we check SAM.gov every Monday morning (Eastern) and email you only when something new is posted, up to 10 still-open notices with due dates and set-asides.

Kind of workPlace of work

We'll send a link to confirm first, and every email has a one-click stop.